Midtronics GR1-120 - Print Last Test Data; Select Language

Press the INFO ( i ) button to return to the Options menu.
Press it again to return to the Charging Mode menu.
3. PRINT LAST TEST DATA
Press the INFO (
i ) button. Use the DOWN/UP  
buttons to select Print Last Test Data.
Press the ENTER
↵↵
↵↵
↵ button to start printing.
The charger prints out the final battery state of charge
(SOC), final measured capacity for Replace decisions,
rated capacity, battery decision, charging mode, amp-
hours put back into the battery, and charging time.
4. SELECT LANGUAGE
Press the INFO (
i ) button. Use the DOWN/UP  
buttons to select Language.
Press the ENTER
↵↵
↵↵
↵ button to continue.
Use the DOWN/UP   buttons to select a language:
English, Español/Spanish, or Français/French.
Press the ENTER
↵↵
↵↵
↵ button to save the new language
selection, and to return to the Options menu.
Press the INFO (
i ) button again to return to the Charging
Mode menu.
Options
↑↓↑↓
↑↓↑↓
↑↓
Print Last Test Data
↵ ↵
↵ ↵
↵
Printing
Options
↑↓↑↓
↑↓↑↓
↑↓
Language/Idioma/Langue
↵ ↵
↵ ↵
↵
Select Language
↑↓ ↑↓
↑↓ ↑↓
↑↓
English
↵↵
↵↵
↵
• 22 •
GR1-120 Options Menu