• 29 •
Chapter 7: QC Test
The tester has the ability to test multiple batteries one after the other without having to input the battery
rating / settings.
There are two types of QC tests: the STOCK CONTROL or the COMPOUND TEST.
STOCK CONTROL is meant for batteries standing in a warehouse or on a pallet where as COMPOUND TESTING
is done when the battery is in the vehicle.
STOCK CONTROL
1. The first screen shows you the amount of tests performed. Once you press both the arrow keys
you reset the test counter.
2. Select the BATTERY TYPE
REGULAR
AGM
2 * 6V SPIRAL
GEL
Press the
NEXT soft key to continue.
3. Select the RATING UNITS
CCA
JIS
DIN
SAE
IEC
EN
Press the
NEXT soft key to continue.
4. Press the
UP/DOWN ARROW keys to select the battery rating or in the case of JIS, the part
number.
Press the
NEXT soft key to start the test.
5. Enter the minimum voltage.
6. Select the TEMPERATURE.
Aim the tester 2 inches (5 cm) from the sides or top of the battery case. As soon as the temperature
reading is stable the operator can press NEXT
The tester will now test the battery.
Chapter 7: QC Test
To Next Page
Loading...
