Settings
56
Spout adjustment
You can find information on adjusting
the height of the spout in the "Spout
adjustment" section of this booklet.
Factory default
You can reset the settings back to the
ones which were set when the coffee
machine was delivered - the factory de‐
fault settings.
When you do this, the language and
time settings will not be deleted. The
number of drinks dispensed and the
coffee machine status (number of uses
until descaling/degreasing the brew
unit) will not be reset either.
Please refer to the "Overview of availa‐
ble settings" chart for the factory set‐
tings which are shown in bold.
The following settings can be reset sep‐
arately:
– MyMiele
– Profiles and their drinks: see "User
profiles" and "User profiles: Creating
and editing your own drinks"
– (Standard) Miele Profile portion sizes
and parameters: see "Resetting
drinks"
Miele@home, Remote control
and SuperVision
These options will only appear if the
coffee machine has been signed on to
the Miele@home system (only available
in selected countries).
Showroom programme (Demo
mode)
Do not activate this function for do‐
mestic use.
The appliance can be presented in
Miele Centers or retail stores with the
Showroom programme function. The light‐
ing will come on but drinks cannot be
dispensed and other actions cannot be
carried out.
If you activate the Demo mode, you
cannot switch the appliance off with
the On/Off sensor .
To Next Page
Loading...
