Miele CVA 6800 - Problem solving guide; Messages in the display

Problem solving guide
78
Most problems that occur during daily use can be easily corrected. With the help
of the following guide, you will be able to find the causes of problems and rectify
them.
 Important! Never open the casing of the appliance.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Repairs should only be carried out by technicians approved by Miele.
If you can't remedy the problem yourself, please call Miele. Please note that a call-
out charge will be applied to unnecessary service visits where the problem could
have been rectified as described in these operating instructions.
Messages in the display
Error messages must be confirmed with OK, otherwise the message can reap‐
pear in the display even though the problem has been remedied.
Follow the instructions which appear in the display to remedy the problem.
If the fault message appears in the display again, contact Miele.
Problem Possible cause and remedy
F1, F2, F3, F4,
F80, F81, F82, F83
There is a fault inside the appliance.
 Switch the machine off with the On/Off  sensor.
Wait for 1 hour before switching it back on again.
F74, 77
F225, F226
F235, F236
There is a fault inside the appliance.
 Switch the machine off with the On/Off  sensor.
Wait for 2 minutes before switching it back on
again.