Installation
97
The appliance comes with four M5
socket screws to help you align and se‐
cure it in the building-in niche.
Open the appliance door, and partial‐
ly tighten the side socket screws.
Carefully turn the lower socket
screws to centre the machine in the
niche.
Tighten both upper socket screws by
hand to secure the machine in the
unit. Do not overtighten them.
Adjusting the door hinges
If the appliance door becomes difficult
to open or close after installation, you
can adjust the hinges to realign it
(TX 20):
Tighten the screw to align it flush
with the furniture front.
Tighten the screw to align the door
horizontally and vertically.
To Next Page
Loading...
