Problem solving guide
81
Unusual performance of the coffee machine
Problem Possible cause and remedy
The display remains
dark when the coffee
machine is switched on
using the On/Off
sensor.
The On/Off sensor was not touched for long
enough.
Touch the On/Off sensor for at least 3 seconds.
The plug is not correctly inserted into the socket.
Insert the plug into the socket correctly.
The mains fuse has tripped because the coffee ma‐
chine, mains voltage or another appliance is defec‐
tive.
Switch off at the wall socket and remove the plug.
Contact a qualified electrician or Miele.
The lighting remains off
after the coffee ma‐
chine is switched on.
The lighting has been switched off.
Switch the lighting on (see "Settings - Lighting").
The lamp needs to be replaced.
Call Miele.
The coffee machine
switches off suddenly.
The switch-off time programmed using the timer has
been reached.
If required, you can select a new switch-off time
(see "Settings - Timer").
The plug is not correctly inserted into the socket.
Insert the plug into the socket correctly.
The coffee machine is
switched on. The light‐
ing switches off sud‐
denly.
The lighting switches off 10 minutes after the coffee
machine was last used.
The sensors do not re‐
act to touch.
The appliance cannot
be operated.
There is a fault inside the appliance.
Open the appliance door.
The process currently running will be stopped.
Disconnect the electricity supply by switching off
at the wall socket and withdrawing the plug, or
switching off the mains circuit breaker.
To Next Page
Loading...
