Problem solving guide
83
Problem Possible cause and remedy
Empty the drip tray ap‐
pears in the display,
even though the drip
tray is empty.
The drip tray doesn't sit correctly in the appliance.
Push the drip tray all the way into the appliance.
The sensors on the drip tray are not working properly.
The contacts are dirty.
Clean the contacts and dry everything thoroughly
(see "Cleaning and care - Drip tray").
The machine door will
not close.
The containers are not pushed all the way in.
Check the containers.
The door hinges are not correctly aligned.
Adjust the door hinges (see "Installation - Adjust‐
ing the door hinges").
To Next Page
Loading...
