Changing the temperature
display
The display is set to show the
temperatures in °F but it can be
programmed to show °C.
Please check that the program selector
is set to "0".
^
Press and hold the - button while
turning the program selector to
DESCALE k.
^
Release the - button.
4 1 will appear in the display.
^ Press the z/g repeatedly until F9
appears in the display.
^ Press the - button.
C9 will appear in the display.
^ Turn the program selector to "0".
The conversion is now stored.
If you wish to revert back to °F follow
the previous instructions until C9
appears in the display.
^
Press the + button.
F9 will appear in the display.
^
Turn the program selector to "0".
Before using for the first time
16
k
p
To Next Page
Loading...
