Insufficient water / water
container not in place
During a program:
If the water container is not seated
correctly, there is not enough water in
the container, or if it is empty the
display will show a small j next to the
symbol for insufficient water p and a
tone will sound.
^ Open the door.
^ Check the water level and add more
water if needed.
^ Push the water container fully into
position and close the door.
^ Press Start.
Cooking will now continue as normal.
After a program has ended:
(with the program selector at "0")
If there is water in the steam generating
unit and the container is not in place, a
tone will sound and F1 will appear in
the display.
^
Reposition the water container in the
appliance and close the door.
^
Press Start.
Now the remaining water can be
pumped out of the steam generating
unit into the water container.
Operation
28
To Next Page
Loading...
