... the following symbols and figures
appear in the display and a tone
sounds:
p j: Insufficient water
Check whether:
–
the water container has been pushed
in as far as it will go.
–
there is sufficient water in the water
container.
–
any parts of the connector are
deteriorated or broken and need
replacing.
See "Connector" section for details.
k j 0: The appliance has locked and
requires descaling (see "Descaling").
... the oven cavity temperature and
the temperature symbol are flashing
in the display:
There was a power failure during a
program. Press Start.
... after turning the appliance off
(program selector at the "0" position)
a continual tone is heard and F1
appears in the display?
Check whether the water container is in
the appliance to accept residual water
being pumped back out of the oven.
Frequently asked questions
52
To Next Page
Loading...
