Settings
147
Sensor lock
The sensor lock prevents the oven be‐
in
g switched off or settings altered by
accident whilst in use.
– On
The sensor lock is active. Press the
symb
ol for at least 6 seconds to
use the sensors again. The sensor
lock is then deactivated for a short
period.
– Off
The sensor lock is not active. The
sensors r
eact to touch as normal.
Water hardness
The steam oven is set ex-works for Hard
wat
er. It must be adjusted to local water
hardness to ensure trouble-free opera‐
tion and to ensure that descaling is car‐
ried out at the correct interval. The
harder the water, the more often it will
need to be descaled.
– Soft
< 8.4°dH, < 1.5 mmol/l
– Medium
8.4 - 14 °dH, 1.5 - 2.5 mmol/l
– Hard
> 14 °dH, > 2.5 mmol/l
Showroom programme
This function enables the steam oven to
be d
emonstrated in showrooms without
heating up. It should not be set for do‐
mestic use.
Demo mode
If demo mode is activated Demo mode
active. The appliance will not heat up will
appear when the st
eam oven is
switched on.
– On
Touch OK for at least 4 seconds to
activat
e demo mode.
– Off
Touch OK for at least 4 seconds to
deactivat
e demo mode. The steam
oven can then be used as normal.
To Next Page
