Miele DGC 6860 - To Start a User Programme

User programmes
64
A message will appear in the display
confi
rming that the programme has
been saved.
 Confirm with OK.
You can start the saved programme im‐
mediat
ely, delay the start or change the
cooking stages.
The option Change cooking stages is
descri
bed in "To change a User pro‐
gramme".
To start a User programme
 Place the food in the oven.
 Select User programmes .
The programme names will appear in
the display.
 Selec
t the programme you want.
You can start the saved programme im‐
mediat
ely, delay the start or display the
cooking stages.
– Start now
The programme will start. The oven
compar
tment lighting and the steam
generator will switch on immediately.
– Start later
This option only appears if you are
using
the food probe. You can speci‐
fy when you want the programme to
start.
– Ready at
You specify the time you want cook‐
ing to stop.
– Start at
You specify the time you want cook‐
ing t
o start.
– Display stages
A summary of your settings will ap‐
pear in the display
. You can alter the
settings via Change (see "To change
a User programme").
 Select the function you want.
The programme will start according to
the specified star
t or finish time.