Operation: Steam cooking
41
Advanced operation
Setting further durations
You have placed the food in the oven,
select
ed a temperature and a duration.
You can set the programme to switch
on and off aut
omatically by setting
Ready at or Start at.
– Ready at
You specify the time you want cook‐
ing t
o stop.
– Start at
You specify the time you want cook‐
ing t
o start.
Cooking results can be impaired if
ther
e is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
If the temperature in the oven is too
hig
h, e.g. just after another pro‐
gramme, you will not be able to use
this function. Ready at / Start at will not
appear in the display if this is the
case. Open the oven door until the ap‐
pliance has cooled down.
A Ready at time can
not be entered if
you are using the food probe. When
using the food probe, the end of the
cooking duration is determined by
when the set core temperature is
reached. Only Start later can be selec‐
ted.
Switching on and off automatically
To switch a cooking programme on and
off aut
omatically you have a choice of
how to enter the time parameters:
– Duration and Ready at
– Duration and Start at
Example: it is 11:45. The food takes
5 minut
es to cook and should be ready
at 12:30.
Set a time of 00:05 in the Duration
field.
Set a time of 12:30 in the Ready at
field.
Confirm with OK.
Start at is cal
culated automatically. The
cooking duration entered is added to
the heating-up time calculated by the
steam oven.
Start at 12
:18 appears in the display.
The cooking process will start automat‐
ically at this time.
To Next Page
