Settings
71
The factory setting is shown in bold.
Programme Status Possible settings
P1 Buzzer volume S0
S1
S2
S3
S4
Off
Very quiet
Quiet
Medium
Loud
P2 Buzzer duration at end of
programme
S0
S1
S2
Single tone
Short intermittent tone
Long intermittent tone (5 min.)
P3 Safety lock S0
S1
Not possible
Possible
P4 Programme displayed when
switched on
S0
S1
S2
S3
S4
Steam with pressure
Steam cooking
Reheat
Defrost
Last programme selected
P5 Water hardness S1
S2
S3
S4
Soft / <1.3 mmol/l
Medium / 1.3–2.5 mmol/l
Hard / 2.5-3.8 mmol/l
Very hard / >3.8 mmol/l
P6 Location S0
S1
Below 1000 m
Above 1000 m
P7 Temperature change S0
S1
In 5° steps
In 1° steps (during the heating-up stage,
the temperature will still be indicated in 5°
steps)
P8 Demonstration mode and
factory default settings
S0
S1
S9
Demonstration mode on
Demonstration mode off
Factory default settings reinstated
To Next Page
Loading...
