Operation: Microwave function
48
Sequence of an automatic
programme
Up until the start the function, the
selected power level, the duration (time
remaining), Start at and the start time
will appear in the display.
After the start you can follow the time
counting down in the display. The time
counts down in seconds.
At the end of the programme the
magnetron will switch off. A buzzer will
sound if this option has been switched
on (see "Settings – Volume – Buzzer
tones"). Process finished will appear in
the display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via Change. Touch
twice to go to the main menu.
Changing settings during a
programme
Select Change.
The following will appear in the display:
– Power level
– Duration
– Open further settings
Further cooking durations can be set
or the function changed by selecting
Open further settings.
Changing the microwave power level
Change the microwave power level
Select Start.
The programme will restart with the new
microwave power level.
You can permanently reset the
recommended power level to suit your
personal cooking practices. See
"Settings - MW power levels".
Changing the cooking duration
Change the duration.
Select Start.
The programme will restart with the new
duration.
To Next Page
