User programmes
56
Once you have entered the
programme name, select Save.
A message will appear in the display
confirming that the programme has
been saved.
Confirm with OK.
You can start the saved programme
immediately, delay the start or change
the cooking stages.
The option Change cooking stages is
described in "To change a User
programme".
To start a User programme
Place the food in the oven.
Select User programmes.
The programme names will appear in
the display.
Select the programme you want.
You can start the saved programme
immediately, delay the start or display
the cooking stages.
– Start now
The programme will start. The steam
generator or the magnetron will
switch on immediately.
– Ready at
You specify the time you want
cooking to stop.
– Start at
You specify the time you want
cooking to start.
– Display stages
A summary of your settings will
appear in the display. You can alter
the settings via Change (see "To
change a User programme").
Select the function you want.
The programme will start according to
the specified start or finish time.
To Next Page
Loading...
