Adding liquid detergents and
neutralizers
^
Switch off the washer-disinfector.
^
Open the door of the storage cabinet
that houses the liquid dispensers.
^ Remove the containers from the
washer-disinfector, open and fill with
the appropriate processing
chemicals, always complying with the
colour coding.
^
Insert the dipstick into the container
opening and screw it into place.
Double-check the color coding.
Once the containers have been filled,
the message clears from the display.
If the message FILL DOS 1, 2, 3 or 4
appears in the display, top up the
levels. This will keep the containers
from going completely dry.
If a given container is not required,
you can disable the status query for
the dispensing system that is not
being used and no fault message
will appear (see the "Programming
manual" section on "Machine
functions /Dispensing/Query
container").
Adding liquid detergents and neutralizers
36
To Next Page
Loading...
