How to switch on
^
If the water valves are closed, open
them.
^
Press the "ON/OFF" I-0 button.
In operating levels A, B and D the most
recently selected PROGRAM NAME is
displayed and in operating level C
Automatic mobile unit recognition is
displayed.
Changing the operating level
You can use the electronic controls to
choose one of four operating levels:
A = Pre-set programs / open
programs
B = Open program selection
C = Automatic mobile unit (AWK)
recognition (program selection
with mobile unit coding) - Option -
D = Programming / open program
selection / Change code (see
"Programming manual")
To change the operating level:
^
Press 1 and 2 simultaneously. The
display will show the operating levels
ABCD.
^
Use 1 or 2 to change the operating
level.
^
Press the "Start" button 6 to confirm
the selected operating level.
^
You will be prompted to enter a code.
The factory pre-set coding is
ü0000<.
To do so:
– Press the "Start" button 6.
You will see [0000]
– Enter digits with 4 and 3,
– Select digit placement with 1
or 2,
– Use the "Start" button 6 to
confirm the code.
If an incorrect entry is made, the
display will show:
FALSE CODE, PLEASE ENTER AGAIN.
^ Close the door.
Select/change your code
The factory pre-set code can be
changed (see "System function" in
the "Programming manual").
Code 1 for Levels ABC
Code 2 for Levels ABCD
Operating the machine
38
To Next Page
