Turning off
^
Press in and release the "ON/OFF" I-0
button.
^
Close the water valves.
Cancelling a program
A program can only be interrupted
or cancelled in operating levels "B"
and "D".
In order to conduct a performance
qualification to assess the cleaning
result, the program must be
cancelled before it proceeds to the
disinfection step (as per EN ISO
15883-1).
In operating levels "B" or "D"
^ Press the "Stop" 7 button to interrupt
a program.
The display will ask CANCEL OR
üCONTINUE<.
,
In cases involving mandatory
decontamination, disinfectant must
be added to the contaminated water
before it can be released into the
public water system. The door can
be opened for this purpose.
^
Use the cursor button 1 to select
CANCEL. The cursors ü < will flash.
^
Press the "Start" button 6. The
program is cancelled and the water
is drained away. The display will read
DRAIN WATER.
^
Once the water has been drained,
the desired program can be selected
and started.
Operating the machine
41
To Next Page
Loading...
