Setting the water softener
^
Switch off the machine.
^
Turn the programme selector to the
STOP position f.
^
Press ß and 6 at the same time,
hold them in and, whilst doing so,
switch the machine on with the I-0
button.
The current programme status "P..."
will show in the display.
The indicator light p / 6 will come
on.
^
Press 0 once, E01 for programming
level 1 will appear in the display.
^ Turn the programme selector one
switch position clockwise (1 o’clock
position).
The number 19 appears in the dis-
play (the factory water hardness set-
ting in °d), (equivalent to 3.4 mmol/l).
^ Press ß as many times as is neces-
sary, or hold it in until the required
value (hardness level in °d) appears
in the display.
Once the number 60 has been
reached, the counter will begin again
at 0.
^
Press the 6 button. SP will appear in
the display.
^
Press 6 again. The setting will now
be stored in memory. The display will
go out.
^
The machine is now ready for use.
For future servicing it is useful to make
a note of your water hardness level.
^
Enter your water hardness level here:
°d (German scale) or
mmol/l
Water softener
17
To Next Page
