After sales service
Important:
When a fault first occurs, please check
that the fault has not been caused by
incorrect operation. This will help avoid
an unnecessary service call-out. To do
this:
^
Turn the programme selector to the
STOP position f (the fault code goes
out).
^
Switch the machine off (press I-0).
^
Switch the machine on again and
reselect the programme.
If you still have difficulties or if a fault
code "F..." appears in the display,
please contact your authorised Service
Dealer or the Miele Service Depart-
ment. See back cover for addresses.
Please quote the fault code as well as
the model type and number of your ma-
chine which is given on the data plate
inside the door (see also "Electrical
connection").
Correcting minor faults
52
To Next Page
Loading...
