Miele G 7882 - Programme chart; Programme overview (part 1)

Programme When to use Cleaning agent
(when not using liquid
cleaning agent)
Follow manufacturer’s
instructions
A
Freely programmable
B
varioTD NR
In accordance with general hygiene regulations. Suit
-
able for sensitive instruments. e.g. Aluminium cas
-
settes.
This programme complies with the requirements of prEN
ISO 15883-1. 90 °C (+ 5 °C, - 0 °C) with 5 min holding
time.
This is a freely programmable programme.
Preferably a neutral liq
-
uid cleaning agent
E
UNIVERSAL
For normally soiled items
(without disinfection)
30 grammes in the clean
-
ing agent dispenser
D
PRE-RINSE
For rinsing heavily soiled items (e.g. for removing soiling
or disinfectant residue or to prevent soiling drying on to
dishes when a complete programme does not yet need
to be run).
6
DRAIN
For draining water out of the machine, e.g. when a
programme has been interrupted. Turn the programme
selector to the STOP position f first!
If applicable observe regulations on containing the
spread of epidemics - see "Cancelling a programme ".
CHEM 60°C-5’
For cleaning and disinfecting heat sensitive materials at
60°C with a 5 min. temperature holding time, using a 1%
concentration of suitable disinfecting agent.
30 grammes in the clean
-
ing agent dispenser
combiCHEM
60°C-5’
For cleaning and disinfecting heat sensitive materials at
60 °C with a 5 min. temperature holding time, using a 1
% concentration of suitable disinfecting agent. Cleaning
and disinfection are carried out in the same cycle.
30 grammes in the clean
-
ing agent dispenser
Programme chart
32