A suitable low foaming disinfecting
agent is added to programme stage 5
during the "CHEM 60°C-5’" and
"combiCHEM 60°C-5’ programmes.
Only possible if DOS-Module G 60
(special accessory) is fitted and the
dispensing system has been vented.
^
Place the green
container with disin
-
fecting agent on the floor next to the
machine or in an adjoining cupboard.
On first commissioning or when the H/
CHEM * indicator light on the control
panel lights up.
* Important:
The "H/ CHEM " indicator
light will also light up if the rinsing agent
container is empty.
^
Fill the container (green) with disin
-
fecting agent or change for a new
one, and then:
^ Insert the siphon tube into the con-
tainer (observe the colour code).
Please remember to fill the container in
good time, it should not be allowed to
empty completely.
Setting the dosage
See "Programming special functions"
for setting the dosage amount and
venting the dispensing system.
Adding chemical disinfecting agent (optional)
23
To Next Page
