Cleaning the spray arms
Waste particles can lodge in the spray
arm jets.
It is therefore important to inspect the
spray arms regularly.
^
Use a sharp pointed object to push
particles into the spray arm jets and
rinse well under running water.
Remove the spray arms as follows:
^
Unscrew the upper spray arm.
^
Remove the middle spray arm by un
-
screwing the nut
which secures it to
the upper basket.
Important:
The nut has a left hand
thread and has to be turned clock-
wise to unscrew it.
^ Loosen the knurled thumb nut to un-
screw the lower spray arm.
You will first need to take the bottom
basket out of the machine.
Important:
After replacing the spray arms, check
that they rotate freely.
Cleaning and care
48
To Next Page
Loading...
