Changing a programme
Provided the Start button has not yet
been pressed, a wrongly selected
programme may be changed as de
-
scribed below (if it has been pressed,
see "Cancelling a programme"):
^
Turn the programme selector to the
required programme.
^
Select additional function DRYING
0 again if required (see "Selecting
an additional function").
^
Press the Start button 6.
Selecting an additional function
The following additional function can be
selected:
^ 0 DRYING
may be selected as an additional
function as soon as the programme
has been selected (except with D
PRE-RINSE and 6 DRAIN). Drying is
phased over 10 minutes. The total
running time of the programme
lengthens accordingly.
Programme sequence display
The indicator light for the active
programme stage lights up during the
programme.
k Reactivation
I Pre-wash
l Wash and disinfection if
applicable
H Interim rinse / Final rinse and
disinfection if applicable
c Drying (additional function)
r End of programme
(Programme parameters have
been reached)
At the end of a programme
The programme has ended when r
lights up constantly in the programme
sequence display and the Start indica
-
tor light 6 has gone out. A 0 appears in
the middle of the display. All the other
indicator lights come on and go out in
sequence. At the same time a buzzer
sounds for a maximum of 30 seconds
(standard setting). The buzzer can be
changed (see "Programming special
functions").
Use the ß button to call up the total
running time of a programme or the ac-
tual temperature.
Switching off
^ Press and release the I-0 button.
Note:
As the machine is fitted with an electric
door lock, the door can only be opened
if the I-0 button is pressed in (see
"Opening and closing the door").
Operation
37
To Next Page
Loading...
