Miele H 2467 B - Operation; Basic Operation; Changing Values and Settings for a Cooking Programme; Changing the Temperature

Operation
42
Basic operation
 Place the food in the oven.
 Select the required oven function with
the function selector.
The oven function is displayed briefly
and then the recommended
temperature will appear.
 Change the recommended
temperature with the rotary
selector, if necessary.
Otherwise the recommended
temperature will be accepted within a
few seconds. You can change the
temperature subsequently via the
rotary selector.
 Confirm with OK.
The current temperature will appear and
the heating-up phase will begin.
You will see the temperature rising in
the display. A buzzer will sound when
the selected temperature is reached for
the first time.
 When the cooking programme is
finished, turn the function selector
to0.
 Take the food out of the oven.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
- Temperature
- Duration
- Finish at
- Start at
Changing the temperature
You can permanently reset the
recommended temperature to suit
your cooking preferences via the|
Recommended temps sensor.
 Change the temperature using the
rotary selector.
The temperature changes in 5°C steps.
 Confirm with OK.
Useful tip: If you have programmed a
cooking duration, you first have to quit
the “Cooking duration” menu by
touching the sensor. You can then
change the temperature using the rotary
selector.
Then touch the sensor to display the
cooking duration again.