Cleaning and care
66
Lift the middle pane up gently and
pull it out.
Clean the door panes and other
individual parts with a clean sponge
and a solution of hot water and
washing-up liquid or a clean, damp
microfibre cloth.
Dry all parts with a soft cloth.
Then reassemble the door carefully.
Refit the middle pane in such a way
that the material number is legible
(not reversed).
Push the inner pane with the matt
printed side facing downwards into
the plastic strip and place it between
the retainers.
Flip both the glass pane retainers
inwards to close them.
The door is now reassembled.
To Next Page
Loading...
