Miele H 2467 B - Page 70

Problem solving guide
70
Problem Possible cause and remedy
12:00 appears in the
display.
The power supply was interrupted for longer than
5minutes.
 Reset the time of day (see “Settings – Time of
day”).
Cooking process durations will also need to be
reset.
Power cut appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Turn the function selector to0.
 Restart the cooking programme.
Max. op. hours reached
appears in the display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off
function.
 Confirm with OK.
The oven is now ready to use.
Faultand a fault code
not listed here appears
in the display.
A fault has occurred that you cannot resolve.
 Call Miele.
A noise can be heard
after a cooking process.
The cooling fan remains switched on after a cooking
programme (see “Settings – Cooling fan run-on”).
The oven has switched
itself off.
The oven will switch itself off automatically to save
energy if no other action is taken within a certain time
frame after switching it on or after the end of a
cooking programme.
 Switch the oven back on.
Cakes and biscuits are
not cooked properly
after the duration given
in the cooking chart.
A different temperature from the one given in the
recipe has been used.
 Select the temperature required for the recipe.
The ingredient quantities used are different from
those given in the recipe.
 Check whether you have amended the recipe. The
addition of more liquid or more eggs makes a
moister mix which would take longer to cook.