Changing the time of day
In the following example the time of
day is changed from 12:05 to 13:33.
To do this:
Turn the programme selector to "0".
Turn the function selector (right hand
dial) until triangle V is underneath
the m symbol in the display.
Whilst triangle V is flashing, turn the
(–/+) input dial clockwise until the re-
quired time shows in the display.
The m symbol will go out after a couple
of seconds and the time set stored in
memory.
If the display is set to show the time,
the time of day will then show in the dis-
play.
Operation
17
To Next Page
