Miele H 357 - Programming Sequence Principle

Programming sequence
Temperatures, times and other func-
tions are controlled using two rotary
dials:
– Input dial (–/+)
– Function dial (V).
The display will show what these dials
are set to.
To change a setting on the oven:
Turn the programme selector to the
required position.
Turn the function dial clockwise or
anti-clockwise until triangle V is
underneath the required symbol in
the display.
Whilst triangle V is flashing, use the
–/+ Input dial immediately to make
any changes.
The triangle will flash for appox. 5
seconds. If this input period has
elapsed you will have to use the
function dial to re-select the func-
tion.
This principle applies whenever you
change a setting.
See "Changing the time of day" and
"Using the oven" for examples which
explain this principle in detail.
Programming sequence
23