Miele PIB 100 User Manual

Cleaning and care
56
Empty drawer
 Remove the residual water drawer
and empty it.
The message Fit drawer is now
shown in the display.
 Rinse the residual water drawer thor-
oughly.
The residual water drawer is dish-
washer-safe or can be washed by
hand using warm water and a little
washing-up liquid.
 Dry the residual water drawer. Make
sure that the metal contact disks
(contacts) at the top of the residual
water drawer are clean and dry.
 Slide the residual water drawer back
into the tower until it clicks into place.
The message Descaling finished will ap-
pear in the display.
 Press the OKbutton.
The soleplate of the iron must then be
rinsed.
Rinsing the soleplate
The iron must not be warm from pre-
vious use.
Let the iron cool down for at least 60
minutes before rinsing the soleplate.
 Make sure that the non-stick sole-
plate has been removed from the
iron.
If the non-stick soleplate is still on the
iron, remove it now (see “Removing the
non-stick soleplate”).
 Fill the water container with fresh tap
water (see “Filling the water con-
tainer”).
 Set the temperature selector on the
iron to “cold” so that the line on the
selector is pointing to the indicator
light.
 Plug the steam hose of the iron into
the steam connection on the tower
(see “Connecting the steam hose”).
If the steam ironing system is switched
off, switch it on now by pressing the
button. When the steam ironing sys-

Miele PIB 100 Specifications

General

Brand	Miele
Model	PIB 100
Category	Iron
Language	English