Problem solving guide
69
Problem Cause and remedy
Use the button on the control panel to switch
the steam ironing system on.
The steam hose is not plugged in properly.
Plug the steam hose into the steam connection on
the tower again (see “Connection”).
The iron has not been used for some time.
Move the iron or activate the steam button .
The steam button is locked.
Unlock the button by pushing the slider on the iron
forward.
The temperature set on the temperature controller
has already been reached.
Set the temperature controller to a higher temper-
ature, if necessary.
The steam ironing system is rinsing.
Wait until the rinsing process has been completed
(see “Automatic rinsing”).
The display is indicating a malfunction.
Rectify the indicated malfunction and proceed as
described in the following pages (see “Display
messages”).
The steam ironing system is damaged.
Contact Miele Service.
To Next Page
Loading...
Need help?
General
