What if Possible cause Solution
Clean out
airways
The dryer does not work at its
optimum or not efficiently.
Possible cause: clogging by
lint or detergent residues
–
Usually cleaning the lint
filter fixes the problem.
If the problem persists,
check all possibilities as
described under "The
program runs too long or
stops".
To delete the message:
–
Confirm with "OK".
The exhaust duct maybe very
long. This is not a fault.
With a long exhaust duct,
program times and energy
consumption increase.
The cycle of the "Clean out
airways" indicator can be
adjusted.
– See "Menu Settings -
Supervisor level - Cleaning
the airways".
Program change
not possible
A running program needs to
be changed.
To select a different program,
the running program must be
canceled.
Progr. end time
delayed
This is not a fault. While the delay start time was
counting down, the settings
were changed or there was a
power failure.
Frequently asked questions
22
To Next Page
Loading...
