Changing the light bulb
To reduce the risk of electric shock,
disconnect this appliance from the
power supply by unplugging or
tripping the circuit breaker.
^
Open the door.
The bulb cover is located along the
upper rim of the drum opening.
^
Slide a screwdriver with a wide head
underneath the side edge of the bulb
cover and twist (see illustration).
^
Flip down the bulb cover.
^
Replace the light bulb with a
temperature proof bulb available
from Miele.
The light bulb must not exceed the
maximum wattage quoted on the
data plate.
^
Replace the light bulb with a new
one.
^
Flip the light bulb cover upwards and
press it firmly onto the left and right
side until it clicks into place.
,
Make sure the bulb cover is
securely closed to prevent a short
circuit or penetrating moisture.
Penetrating moisture can cause a
short circuit.
Frequently asked questions
26
To Next Page
Loading...
