6. Start a program
During the program selection the "Start"
indicator flashes meaning that the
program can be started.
^
Press the "Start" button.
The "Start" indicator lights.
"Program start" is displayed, then
"Drying" and the program duration.
The drying levels in the drying level
programs are displayed, e.g. machine
iron, hand iron, etc.
Before the end of a program
After drying with hot air, the cool down
phase finishes the program. "Cooling
down" is displayed. Only after the
cooling down phase has ended the
program is finished.
These programs do not have a cooling
down phase: "Woollen handcare",
"Smoothing".
7. At the end of a program
"Anti-crease" (if selected) and "End"
mark the end of a program in the
display. During the anti-crease phase
the drum will turn in intervals if the
laundry is not immediately removed
from the dryer. This will prevent the
laundry from wrinkling. Run time 1 h.
^
Use the "Door" button to open the
drum door.
^
Remove the laundry.
Check the drum for any missed
pieces of laundry. Any items left in
the dryer can be damaged because
of over-drying.
If the door stays open, the light goes off
after a few minutes (energy saving).
^ Close the door.
Cleaning and care hints
^ See maintenance instructions.
Use
13
To Next Page
Loading...
