Installation
,
Do not install a lockable or slide
door in the pivoting area of the dryer
door.
Transporting the dryer to the
installation site
The rear overhang of the lid has
transport grips.
^
Use the front dryer feet and the rear
overhang to transport the dryer from
the packaging base to the installation
site.
Level the dryer
The dryer must be level to ensure safe
and proper operation.
^
The machine can be leveled by
turning the legs clockwise or
counterclockwise as necessary.
,
An air gap of 3/8" (10 mm) must
be provided between the machine
and the floor. The vents must not be
blocked by toe kicks, long piled
carpet, etc.
This dryer cannot be installed under
a countertop.
Installation
34
To Next Page
Loading...
