Gentle tumble button
^
Select this option for items which are
susceptible to creasing and which
are not suitable for drying with a
great deal of mechnical action.
–
The indicator light will come on when
the option is selected.
^
See "Programme chart".
+ button
^
See "Delay start".
Coin operation/payment system
If your machine is connected to a
payment system, the amount of credit
required will appear in the display.
Credit may be lost if, after the
programme has started, the door is
opened or the programme cancelled
(depending on how the machine
was set up).
D Start the programme
The indicator for the Start button will
flash as soon as a programme can be
started.
^
Press the Start button.
–
Programme running will appear in
the display, followed by Drying and
the programme duration.
–
With programmes with a choice of
drying level, e.g. Machine iron,
Hand iron etc., the drying level will
be shown in the display when it is
reached.
Changing the programme sequence
Further information about the following
can be found under "Changing the
programme sequence":
–
Payment system
–
Changing a programme once it has
started
–
Cancelling the current programme
–
Adding or removing laundry after a
programme has started
–
Power cut
– Time remaining
Programme duration/Estimated time
remaining
When a programme is selected, the
estimated duration will appear in the
display. Please be aware that it is only
an estimate.
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the dryer and adjust the
estimated time remaining for a more
accurate reading. Because of this, the
time displayed can alter during the
course of a programme.
Short instructions
24
To Next Page
Loading...
