Depending on the Delay start setting,
you can set the time you wish a
programme to finish or start at, or you
can delay the start of the programme.
Factory default: Delay start not
activated.
To select Delay start
^
Select the programme you want and
then press the + button.
–
The indicator light will come on when
the option is selected.
10:00
Start:
10:00
Finish:
11:16
Example: The display will show the
current time of day at the top, the start
time in the middle and the finish time at
the bottom.
10:00
Start:
11:14
Finish:
12:30
^
Use the + button to select the desired
time. The time will shift to the next
half hour.
The Start and Finish times are adjusted
in increments of 30 minutes. The
maximum time that an automatic
programme start can be delayed by is
24 hours.
Use the – button to reduce the time.
^
Confirm your selection by pressing
the OK button.
To begin Delay start
^
Press the Start button.
Normal
Start in: 1:14h
The delay start time will now count
down in minutes until the start of the
programme.
The drum will turn briefly every hour to
help prevent creasing.
Changing the programme sequence
While the delay start time is counting
down, you can still ... . .
. . . select the Gentle tumble option or
another drying level.
. . . press the Door button and add or
remove laundry. After closing the door,
press the Start button.
To alter Delay start
^ Press the + button.
^
Use the – or + button to alter the
time.
^
Confirm your selection by pressing
the OK button.
To delete Delay start
^
Press the + button.
^
Press and hold the – button until the
time stops reducing.
^
Confirm by pressing the OK button.
The programme will now start immedi
-
ately.
To cancel Delay start
^
Turn the programme selector to
Finish.
Delay start
26
To Next Page
Loading...
