Installation site
,
Make sure the dryer door can be
opened without hindrance after
installation.
Transporting the dryer to its
installation site
When moving the dryer, hold it by the
lid where it protrudes to the rear. To
manoeuvre the dryer out of its packing
case to its installation site you will also
need to hold it by the front feet.
,
Ensure the tumble dryer is stable
during transportion.
,
If transporting the dryer at an
angle, only tip it towards its left side.
,
If the tumble dryer has not been
transported as described, then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply. Otherwise the
heat pump can be damaged.
Installation and connection
52
To Next Page
Loading...
