Problem Possible cause Remedy
E
OK
Clean plinth filter
–
The filter is clogged.
–
The fluff filters in the
door and door
opening may also be
heavily clogged.
–
Clean the filters as
described in "Cleaning
and care". . .
. . . "Cleaning the plinth
filter"
. . . "Cleaning the
surfaces of the fluff
filters".
To delete the message:
–
Confirm with OK.
Please note: You can adjust the level of fluff at which
this message appears in the Settings menu under
"Clean out airways".
E
OK
Open bottom right
grille. Clean airways
The cooling fins behind
the grille can become
blocked by dirt particles
drawn in with the room
air.
– Clean these as
described in "Cleaning
and care - Bottom right
grille/airway".
To delete the message:
– Confirm with OK.
; Fit plinth filter or
put it in the other
way around
– The plinth filter is
missing or has been
fitted the wrong way
round.
–
Removing the filter
during a drying cycle
will cause the
programme to be
cancelled.
– Check the plinth filter.
; Programme cannot
be changed
An attempt has been
made to alter a
programme while it is in
progress.
–
You will need to cancel
the current programme
before you can select a
new one.
2
OK
Drain fault
Check drainage
The drain hose is kinked.
–
Remove the kink.
To delete the message:
–
Confirm with OK.
Problem solving guide
42
To Next Page
Loading...
