Operating the washing machine
17
Symbols on the display
Temperature: use the Temperaturesensor control to set the temperature
of the wash programme.
Spin speed: use the Spin speedsensor control to set the spin speed of
the wash programme.
Extras: use the Extrassensor control to add Extras to a wash pro-
gramme.
Pre-wash: use the Pre-washsensor control to select the Pre-washExtra
for a wash programme.
Pre-rinse: use the Pre-rinsesensor control to rinse the laundry before the
start of the wash programme.
Rinse plus: use the Rinse plussensor control to add an additional rinse
cycle to a wash programme.
Microfibre: use the Microfibresensor control to gently cool microfibre
mops at the end of the main wash cycle.
Residual moisture: use the Residual moisturesensor control to set the
residual moisture after spinning.
Spin duration: use the Spin durationsensor control to set the residual
moisture after spinning.
Further choices: use the Further choicessensor control to set further op-
tions.
Supervisor level: use the Supervisor levelsensor control to alter the
washing machine's settings.
Delay start: use the Delay startsensor control to set the starting time of a
wash programme...
...or the finish time
...or the time until the programme starts.
To Next Page
Loading...
Need help?
General
