Miele PWM 508 Mop Star 80 User Manual

Supervisor level
82
Cloths Ch-th. disin.
The pre-set disinfection process can
be altered in the Cloths chemo-
thermal disinfectionprogramme.
- 40°C/20min
- 60°C/20min (factory default)
- 70°C/10min
Pre-treat cloths rpm
The pre-set spin speed can be altered
in Finish/Pre-treat cloths programmes.
- 400rpm
- 600rpm
- 800rpm (factory default)
- 1000rpm
Empty sensor
A siphon contact can be used to de-
tect whether external detergent con-
tainers are empty. A message appears
if a container is empty.
- Off (factory default)
The Empty sensing function is
switched off.
- Normally open contact
The siphons are equipped with a nor-
mally open contact.
- Normally closed contact
The siphons are equipped with a nor-
mally closed contact.
Early warning counter
An internal counter reports when an
external dispenser container is almost
empty. The counter in question then
has to be reset.
Water level Cottons
You can increase the water level for
the main wash in the Cottonspro-
gramme.
- + 0mm wc (factory default)
- + 10mm wc
- + 20mm wc
- + 30mm wc
Water level Minimum iron
You can increase the water level for
the main wash in the Minimum
ironprogramme.
- + 0mm wc (factory default)
- + 10mm wc
- + 20mm wc
- + 30mm wc

Miele PWM 508 Mop Star 80 Specifications

General

Brand	Miele
Model	PWM 508 Mop Star 80
Category	Washer
Language	English