Changing the programme sequence
46
Adding or removing laundry
You can add or remove items during the
first few minutes after the programme
has started.
Touch the Start/Stopsensor.
The following will appear in the display:
Add laundry
Cancel
programme
Touch the Add laundrysensor.
The programme will stop and the door
will unlock.
Risk of chemical burns from de-
tergent.
When adding or removing laundry,
your skin may come into contact
with detergent, particularly if the de-
tergent is dispensed externally.
Take care when placing your hands
inside the drum.
If suds have come into contact with
the skin, rinse off immediately with
plenty of lukewarm water.
Pull open the door.
Add laundry or remove individual
items.
Close the door.
Touch the Start/Stopsensor.
The programme will continue.
Once a programme has started suc-
cessfully, the washing machine cannot
recognise any adjustment to the load.
For this reason, if laundry is added or
removed after the start of a pro-
gramme, the machine will always
complete the programme cycle as-
suming a full load.
The door cannot be opened, if:
- The suds temperature is above 55°C.
The safety lock will remain activated if
the temperature in the drum is above
55°C. The lock will not deactivate un-
til the temperature has dropped to be-
low 55°C.
To Next Page
Loading...
Need help?
General
