Installation
*INSTALLATION*
61
Installation locations
Side view
Washer-dryer stack
The washing machine can be installed
as a washer-dryer stack together with a
Miele tumble dryer. This requires a
Miele washer-dryer stacking kit which
can be purchased separately.
Installation on a plinth
The washing machine can be installed
on a steel plinth (open or closed, avail-
able as an optional Miele accessory) or
on a concrete plinth.
Injury can occur if the washing
machine has not been adequately
secured.
When installing the machine on a
plinth, there is the danger of the
washing machine falling off the plinth
during spinning.
Secure the washing machine using
the clamps supplied.
Installation notes
The distances between the machine
and the wall are recommendations to
help make it easier to carry out service
work. If installation space is limited,
the machine can also be pushed up
against the wall.
This washing machine is not suitable
for building under.
Risk of damage due to moisture
ingress.
Moisture can damage electrical com-
ponents.
Do not install the machine near or
directly above an open gully or floor
drain.
To Next Page
Loading...
Need help?
General
