Miele PWM 508 Mop Star 80 User Manual

Programme chart
38
Pre-treat mops (ready to use)
- Mops are washed and pre-treated in one cycle.
- A pre-spin* and a pre-rinse cycle are carried out before the main wash.
- There is no water intake via the fabric conditioner compartment during the disin-
fecting process.
Mops +rtu 60°C Max. load8.0kg
Items Cotton, mixed fibre or microfibre mops
Tip Add the pre-treating agent via the fabric conditioner compartment
or the external dispensing system.
0–60 sec Extras: 2nd Pre-rinse, Microfibre Rinses: 2–5*
Mops plus + rtu 40°C to 90°C Max. load8.0kg
Items Cotton, mixed fibre or microfibre mops
Tip Add the pre-treating agent via the fabric conditioner compartment
or the external dispensing system.
0–60 sec Extras: 2nd Pre-rinse, Microfibre Rinses: 2–5*
Mops disinfection + rtu 85°C Max. load8.0kg
Items Cotton, mixed fibre or microfibre mops
Tip - Further disinfection methods can be selected.*
- Use powder detergent containing a bleaching agent.
0–60 sec Extras: 2nd Pre-rinse, Microfibre Rinses: 3–6*
Mops disinfection + rtu 70°C Max. load8.0kg
Items Cotton, mixed fibre or microfibre mops
Tip - Further disinfection methods can be selected.*
- Use specialist detergents. Observe the country-specific
guidelines for disinfection.
0–60 sec Extras: 2nd Pre-rinse, Microfibre Rinses: 3–6*
Mops rtu Max. load8.0kg
Items Cotton, mixed fibre or microfibre mops
Tip - For pre-treating clean mops.
- Add the pre-treating agent via the fabric conditioner compart-
ment or the external dispensing system.
0–60 sec Rinses: 1
* Settings can be altered in Supervisor level.

Miele PWM 508 Mop Star 80 Specifications

General

Brand	Miele
Model	PWM 508 Mop Star 80
Category	Washer
Language	English