Programme chart
40
Ready to use
- The residual moisture after pre-treatment is selected with the sensor control.
Mops + rtu 40°C to 90°C Max. load8.0kg
Items Cotton, mixed fibre or microfibre mops
Tip - Mops are washed and finished in one cycle.
- A pre-spin* and a pre-rinse cycle are carried out before the main
wash.
- Add the pre-treating agent via the fabric conditioner compart-
ment or the external dispensing system.
– Extras: Pre-rinse, Microfibre Rinses: 2–5*
Mops rtu cold Max. load8.0kg
Items Cotton, mixed fibre or microfibre mops
Tip - For finishing clean mops.
- Add the pre-treating agent via the fabric conditioner compart-
ment or the external dispensing system.
– Rinses: 1
* Settings can be altered in Supervisor level.
To Next Page
Loading...
Need help?
General
