5. Starting a programme
34
Starting a programme
The programme can be started when
the Start/Stop sensor is flashing on and
off.
Touch the Start/Stop sensor.
The Start/Stop sensor lights up con-
stantly.
11:02 Status
Cottons
Time left
Machine iron
Perfect Dry
h1:42
Drying and the programme duration re-
maining will light up in the display.
The laundry will be cooled down shortly
before the end of the programme.
Tip: In the pull-down menu you can
view the selected drying level or dura-
tion and the energy consumption.
With programmes with a selectable dry-
ing level, PerfectDry calculates the resid-
ual moisture present in the laundry to
ensure precise drying results. If a small
load or dry laundry is placed in the
dryer, it is dried/aired for a preset dura-
tion.
The PerfectDry display will only light up
with programmes with selectable drying
levels:
– Hollow point after a programme
has started
The drying level reached will still be
shown later on.
– Solid point when the drying level is
reached
The time left for the drying level pro-
grammes can vary or “jump”. It de-
pends on the load quantity, type of
laundry, residual moisture in the laundry
or water hardness. PerfectDry continu-
ally adapts, constantly increasing the
accuracy of the time left.
To prevent laundry wearing out
avoid overdrying it.
Energy savings
After 10 minutes, the indicators dim and
the Start/Stop sensor starts flashing.
Touch the Start/Stop sensor to switch
the indicators on again (this does not
have any effect on a running pro-
gramme).
The drum lighting switches off once the
programme has started.
To Next Page
Loading...
