Settings
94
Memory
The dryer saves the settings that were
selected last for a drying programme
(drying stage and/or extra option, or
the duration for some programmes).
When the programme is chosen again,
the saved settings will appear in the
display.
Options
– Off (factory default)
– On
The activation of delay start, the buzzer
or ECO feedback data are not saved.
Clock display
After selecting the clock format you
can set the time of day.
Options
– Clock format
The clock format is set.
– 24 h (factory default)
– 12 h
– Set
The current time is set.
Volume
The volume can be changed for the
buzzer that sounds when the dryer is
switched on and at the end of the pro-
gramme. The volume of the tone that
sounds when a sensor is touched can
also be changed.
Options
– Finish tone
– Keypad tone
– Welcome tone
It can be set to one of 7 different set-
tings or switched off altogether.
Display brightness
The brightness of the display can be
altered.
It can be set to one of 7 different set-
tings.
Factory default: a medium setting
To Next Page
Loading...
