Miele TWV 680 WP User Manual

Settings
95
"Display" off status
To save energy the display and sensor
controls will go out after 10 minutes
and the Start/Stop button will flash
slowly. You can change this setting.
Options
– Off
The display will remain on (i.e. it will
never go out).
– On
The display will go out (after
10minutes):
– if a programme is not selected
after the dryer has been switched
on
– during the current programme
– after the end of a programme
– On. Not in current prog.
(Factory default)
The display will go out (as described
above) but will remain on while the
programme is running.
You can switch the display back on by
touching any sensor.

Miele TWV 680 WP Specifications

General

Brand	Miele
Model	TWV 680 WP
Category	Dryer
Language	English