Cleaning and care
59
Cleaning the plinth filter
Clean the plinth filter whenever Clean
the fluff and plinth filters. See the operating
instruction manual for more information.
lights up or when the programme dur-
ation is longer than usual.
To delete the message:
Confirm with OK.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
Pull the plinth filter out by the handle.
Removing the plinth filter will cause the
right hand guide pin in the dryer to
come out. This pin ensures that the
heat exchanger access panel can only
be closed if the plinth filter is inserted
the right way round.
To Next Page
Loading...
Need help?
General
